top of page
adobestock_298464892.jpg
PP 500P

Mã Sản Phẩm: PP 500P

Description

SABIC PP 500P is a medium flow, multipurpose grade for extrusion and injection molding applications.

Chỉ số nóng chảy (MI): 

3.3

Nhóm VTHH

PP Yarn

Nhà sản xuất

Sabic

Xuất xứ

Công dụng

Kéo sợi, dệt bao, dây thừng, Hàng gia dụng

Mã thay thế

PP H030SG, PP 1102K, PP T3034,...

TYPICAL APPLICATIONS

If applied for extrusion 500P shows an excellent stretch ability and is therefore suitable for tapes and strapping, high tenacity yarns and carpet backing. It can also be used in ropes and twines, woven bags, flexible intermediate bulk containers, geotextiles and concrete reinforcements. For thermoforming it shows a unique balance between transparency, impact resistance and thickness uniformity. 500P is also suitable for production of injection molded articles e.g. caps and closures and house ware products, where this grade shows a high stiffness, combined with a fair impact resistance and very good surface hardness.

Properties
Values
Units SI
Test methods
Polymer properties
Melt flowrate index (at 230°C / 2.16 KG)
Density at 23°C


Flexural Modulus (1% Secant)
Izod Impact Strength 
notched, at 23°C
Rockwell Hardness, R-Scale


Tensile Properties

stress at yield
strain at yield


Vicat Softening Temperature

Heat deflection temperature at 455kPa
g/10 min
kg/m³


MPa
J/m
-



MPa

%


°C
°C


 
ASTM D1238
ASTM D638


ASTM D790 A
ASTM D256
ASTM D785


ASTM D638
ASTM D638



ASTM D1525
ASTM D648

3

905

 

 

1500

25

102

35

10

152

100

Mechanical
Film
Thermal

PROCESSING CONDITIONS

Typical processing conditions for 500P are:

Barrel temperature range: 235 - 250°C

HEALTH, SAFETY AND FOOD CONTACT REGULATIONS

Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. For additional specific information please contact SABIC local representative. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications. This grade material is UL registered under File E111275 (www.ul.com). QUALITY SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO9001. STORAGE AND HANDLING

Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PP resin within 6 months after delivery.

DISCLAIMER

Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.

You may also like

bottom of page