SABIC_F00952
Mã Sản Phẩm: SABIC_F00952
Description
SABIC® HDPE F00952 resin is a high molecular weight high density polyethylene copolymer which has been designed specifically for blown film extrusion. Its high molecular weight, broad molecular distribution and high density combine succesfully to give excellent extrudability with high film strenght and rigidity. The material contains anti oxidant .
Melt Flow Index (MI)
0.05
Material Group
HPDE Film
Producer
SABIC
Origin
Arabic
Application
Food bags, HD bags, market bags
Application
ABIC® HDPE F00952 resin is recommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. Films of this poduct are readily treated and printed to give high quality graphics.
Processing conditions
SABIC® HDPE F00952E can be extruded on conventional HMW-HDPE equipment at melt temperatures between 200 and 235 °C.
Film properties
Film properties have been measured at 15 µm blown film with a BUR = 4.
Properties
Values
Units SI
Test methods
Polymer properties
Melt flow rate (MFR)
at 190 °C and 2.16 kg
at 190 °C and 21.6 kg
Density
g/10 min
g/10 min
Kg/m³
mg/kg
ISO 1133
ISO 1183
SABIC method
Formulation
Film properties
921
111
94
+
ASTM D 1709
ASTM D 1922 ASTM D 1922 ASTM D 882
Dart Impact F50
Tear strength TD Elmendorf
Tear strength MD Elmendorf
Tensile test film
Yield stress TD
Yield stress MD
Stress at break TD
Strain at break TD
Strain at break MD
Modulus of elasticity TD
Modulus of elasticity MD
g
g
g
MPa
MPa
MPa
%
%
MPa
MPa
180
60
12
31
33
56
60
550
400
1500
1250
Anti oxidant
Thermal properties
Vicat softening temperature
°C
125
ASTM D 1525
General information.
SABIC® HDPE copolymer film grades offer, as a result of their relative wide molecular weight distribution a well balanced combination of processing properties, draw down and film properties such as: toughness. impact resistance, stiffness and sealabillity.
Health, Safety and Food Contact regulations.
Detailed information is provided in the relevant Material Safety Datasheet and or Standard Food Declaration, available on the Internet (www.SABIC-europe.com). Additional specific information can be requested via your local Sales Office.
Quality.
SABIC Europe is fully certified in accordance with the internationally accepted quality standard ISO 9001-2000. It is SABIC Europe's policy to supply materials that meet customers specifications and needs and to keep up its reputation as a pre-eminent, reliable supplier of e.g. polyethylenes.
Storage and handling.
Polyethylenes resins (in pelletised or powder form) should be stored in such a way that it prevents exposure to direct sunlight and/or heat, as this may lead to quality deterioration. The storage location should also be dry, dust free and the ambient temperature should not exceed 50 °C. Not complying with these precautionary measures can lead to a degradation of the product which can result in colour changes, bad smell and inadequate product performance. It is also advisable to process polyethylene resins (in pelletised or powder form) within 6 months after delivery, this because also excessive aging of polyethylene can lead to a deterioration in quality.
Environment and recycling.
The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources, the preservations of foodstuffs, etc. SABIC Europe considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional packaging materials. Recycling of packaging materials is supported by SABIC Europe whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered. Whenever 'thermal' recycling of packaging (i.e. incineration with energy recovery) is carried out, polyethylene -with its fairly simple molecular structure and low amount of additives- is considered to be a trouble-free fuel.
